Service hotline：400-828-6080
Email：lufeiyu@flyopt.com
Precautions and maintenance for using BX53 microscopes
Precautions for using BX53 microscopes
1, Olympus BX53 microscope is composed of precision instruments, operation must be careful to avoid sudden or violent collision and vibration, but also pay attention to its no waterproof structure.
2, do not use Olympus BX53 microscope in the above circumstances: direct sunlight, high temperature, humidity, heavy environment; And places that are vulnerable to strong vibrations.
3. When moving the BX53 microscope, first remove the tube and sample, then grasp the handle part behind the mirror arm and the front of the frame, and carefully move it.
4, in order to avoid damage to the microscope, be sure not to move the microscope through the stage or the coarse fine-tuning focal knob. Even if the microscope is moved along the surface of the table, the sample must be removed first; When moving the microscope, do not grip the bottom of the power cover on the rear panel.
Two, BX53 microscope maintenance, maintenance
1. If you need to clean the microscope lens or other glass components, simply blow the dust off the surface with the commercially available ear wash ball, and then gently wipe with a lens paper or gauze.
2, if you need to remove fingerprints or oil stains, please wipe with a small amount of anhydrous alcohol wet gauze. Because anhydrous alcohols are extremely flammable, care must be taken when using them: do not put these chemicals near open flames and possible sources of electrical sparks.
3, do not use organic solvents to clean the non-glass parts of the microscope. When cleaning is needed, use a soft, hairless cloth dipped in a small amount of diluted neutral cleaner to clean.
4, in addition to the parts allowed to be removed in the instructions, do not remove any parts of the microscope, otherwise it may lead to failure or cause performance degradation. 5, after use, turn off the main switch of the microscope, wait until the lamp room is completely cooled, and cover the microscope with a dustproof cover.
400-828-6080
